|
GS-VⅢ
CNC SYSTEM |
| This
system consists of interactive-drawing programming system, control of
working, power source with large power pulse, the main unit use Intel 586
or 6×86 chip. |
| 1. |
Mouse drawing,
parallel translation, rotate, mirror, formula curve, list curve, gear
program-package. |
| 2. |
Input way: keyboard、floppy
disk scanner, can read*. NC(G code),*.3B,*.PCX,*.DXF files. |
| 3. |
Output way: color
display, printer, floppy disk. |
| 4. |
Maximum control
range: 10000mm |
| 5. |
Taper control range:
below 45° |
| 6. |
Automatic search for
the center of circle. |
| 7. |
Screen display
working stereograph and automatic shadowing the machining graphic. |
| 8. |
Single direction
processing. |
| 9. |
Arbitrary parts
processing. |
| 10. |
Reverse direction
processing. |
| 11. |
If there is short
circuit the machining will automatically return and advance. |
| 12. |
If the wire breaks,
the machine will automatically stop. |
| 13. |
If the power is off,
the memory will be protected. |
| 14. |
If the processing
finished, the machine will stop automatically. |
| 15. |
Return to the closest
punch |
| 16. |
Taper is
automatically reset. |
| 17. |
Different shape of
top and bottom machining and alter taper cutting. |
| 18. |
Automatic-jump for
jumping mould. |
| 19. |
Measure point, line,
circle of any complicated drawing. |
| 20. |
Programming drawing
can be machining as altering ratio. |
| 21. |
Programming and
processing at same time. |
| 22. |
Wave-shape of
discharge can be display. |
| 23. |
One controller can
transmits program to eight single-board machines. |
| |