Special Features :
Standard Powder Residue & Protein content for smooth donning and hand protection.

Standard Compliance :
ASTM D3578-05, ASTM 6124-01, ASTM 5712 and EN 455 Part 1+2+3

Tensile Property :
     (a) Unaged – Min 18 Mpa
     (b) Aged – Min 14Mpa

Elongation at Break :
     (a) Unaged – Min 650%
     (b) Aged – Min 500%

Force at Break :
     (a) Unaged – Min 9.0 N
     (b) Aged – Min 6.0 N

Single Wall Thickness :
     (a) Cuff – Min 0.08mm
     (b) Palm – Min 0.08mm
     (c) Finger – Min 0.08mm

Width :
     (a) Extra-Small – 75 +/- 5mm
     (b) Small – 85 +/- 5mm
     (c) Medium – 95 +/- 5mm
     (d) Large – 105 +/- 5mm
     (e) Extra-Large – 115 +/- 5mm

Powder Residue :
10 mg / dm2

Protein Content (Water Extractable) :
Max 200 μg/g

Special Features :
Less Powder Residue & Protein content for smooth donning and hand protection.

Standard Compliance :
ASTM D3578-05, ASTM 6124-01, ASTM 5712 and EN 455 Part 1+2+3

Tensile Property :
     (c) Unaged – Min 18 Mpa
     (d) Aged – Min 14Mpa

Elongation at Break :
     (c) Unaged – Min 650%
     (d) Aged – Min 500%

Force at Break :
     (c) Unaged – Min 9.0 N
     (d) Aged – Min 6.0 N

Single Wall Thickness :
     (d) Cuff – Min 0.08mm
     (e) Palm – Min 0.08mm
     (f) Finger – Min 0.08mm

Width :
     (f) Extra-Small – 75 +/- 5mm
     (g) Small – 85 +/- 5mm
     (h) Medium – 95 +/- 5mm
     (i) Large – 105 +/- 5mm
     (j) Extra-Large – 115 +/- 5mm

Powder Residue :
2 mg / dm2

Protein Content (Water Extractable) :
Max 50 μg/g

Special Features :
-

Standard Compliance :
ASTM D6319 and EN 455 Part 1+2+3

Tensile Property :
     (a) Unaged
           Tensile Strength – Min 14 Mpa
           Elongation at Break – Min 500%
           Force at Break – Min 90 N
     (b) Aged 70 +/- 2°C for 7 days
           Tensile Strength – Min 14 Mpa
           Elongation at Break – Min 400%
           Force at Break – Min 60 N

Single Wall Thickness :
     (a) Cuff (25mm from bead) – Min 0.08mm
     (b) Palm (centre of palm) – Min 0.10mm
     (c) Finger (13mm from tip) – Min 0.12mm

Width :
     (a) Extra-Small – 75 +/- 5mm
     (b) Small – 85 +/- 5mm
     (c) Medium – 95 +/- 5mm
     (d) Large – 106 +/- 5mm
     (e) Extra-Large – 116 +/- 5mm

Length :
 (a) Min 240mm

Visual Defects (Major):
     Lump >2mm, Dirt > 1.5mm, Sticky Pleat > 5mm, Sticky,
     Visible Hole (Non-inflated), Discoloration, Mix Surface,
     Incomplete Bead, Wrong Orientation, Poor Donning.

Visual Defects (Major)(Visible at > 2 feet):
     Lump >2mm, Dirt > 1.5mm, Sticky Pleat > 5mm,
     Rolled Bead, Powder Mark.

Powder Residue :
10 mg / dm2